ADU: Difference between revisions
From WikiDemocracy
Jump to navigationJump to search
mNo edit summary |
mNo edit summary |
||
| Line 20: | Line 20: | ||
#Use 6" heavy rafter screws through header at a 45 for each rafter and 6" timber screws through header straight up into blocking. | #Use 6" heavy rafter screws through header at a 45 for each rafter and 6" timber screws through header straight up into blocking. | ||
#Make sure upper ends of rafter joists are perfectly aligned before screwing in place. The bottom ends can be cut to match sheathing. Also use only screws until everything has been completely set in place. This allows for easy removal of a joist if needed due to unseen warp or twisting. | #Make sure upper ends of rafter joists are perfectly aligned before screwing in place. The bottom ends can be cut to match sheathing. Also use only screws until everything has been completely set in place. This allows for easy removal of a joist if needed due to unseen warp or twisting. | ||
# | #Cut rafter ends so fascia matches with sheathing. | ||
