ADU

Foundation Notes-

1. Rebar chairs allow bending up towards center, making rebar too close to surface at center of slab. Remedy:
2. Use twisting tool for tying rebar.
3. Rent bender (weekly rate) and cutter for rebar.
4. Used soil cement to create sharp edges on upper interior trench.
5. Covered 100 % with 15mil underlayment requires UFER to be placed outside of trench or separate driven rods.
6. Make sure anchor bolts are placed properly during pour. They will need to be adjusted as pouring will move them.

Framing Notes:

1. Cuts at 3.56 degrees for upper walls.
2. Use wall jacks to lift walls.